Easy to Use, Rugged and Compact with 700mW Loud Audio transceiver.
700mW* loud audio
Because air band radios are usually operated in high-noise environments, it is essential for the radio to provide loud and clear audio. The IC-A15/S series employs a BTL amplifier that doubles the audio output, offering loud and clear audio that’ll cut through cabin or tarmac noise.
* Internal speaker only
Full keypad type or Simple keypad type
The IC-A15 full keypad type allows you to input the channel or frequency directly and has an exclusive button for the 121.5MHz emergency channel. The IC-A15S simple keypad type provides simpler operation with a minimum of buttons that is suitable for ground crews.
Compact, light weight and rugged body
The IC-A15/S series is compact (only 120mm tall) and light weight (approx. 350g including antenna and BP-232N). The water resistant construction, equivalent to IPX4, provides reliable operation in wet conditions.
Large capacity Lithium-Ion battery pack
With the 2000mAh large capacity Lithium- Ion battery pack, BP-232N, the IC-A15/S series provides stable output power and 18 hours long (approx.) operating time*. The BP-261, battery case takes 6 AA (LR6) alkaline cells for convenient battery backup.
* Typical operation, Tx:Rx: Stand-by=5:5:90.
200 channels with memory banks
A total of 200* memory channels can be named with an 8-character channel name for easy recognition. For fast and simple operation, these channels can be grouped into 10 memory banks*.
* IC-A15 only. The IC-A15S has 100 memory channels and memory banks are not available.
BC-179 holder type battery charger
The battery charger, BC-179, securely holds and charges the radio, even in bumpy conditions. The cigarette lighter cable, CP-22, can be used with the BC-179.
Other features
- 5W typ. (PEP), 1.5W typ. (CW) output power
- Side tone function allows you to hear your own voice via a third party aviation headset
- LCD backlight for night time operation
- ANL (Auto Noise Limiter) for noise reduction
- Low battery indication and beep alert
- Adjustable microphone gain setting
- BNC type antenna connector
General
Frequency range
118.000–136.975MHz (COM)
Number of memory channels 200 channels
with 10 banks 100 channels
Channel spacing
25kHz
Power supply requirements
7.4V DC (Icom battery pack)
Current drain
Tx 1.5A typ.
Rx Stand-by
50mA typ.
Max. audio
500mA typ.
Dimensions (W×H×D)
(Projections are not included)
53×120×36.9 mm
Weight
350g (with antenna and BP-232N)
Operating temperature range
–20°C to +55°C
Frequency stability
±5ppm
Transmitter
RF output power
5.0/1.5W typ. (PEP/CW)
Microphone impedance
3-conductor 2.5 (d) mm (1/10”)/ 150Ω
Receiver
Sensitivity
–3dBμ typ.(at 12dB SINAD with CCITT)
Selectivity
6dB (More than 7.5kHz)
60dB (Less than 25kHz)
Spurious response rejection
More than 70dB
Audio output power(at 10% distortion with an 8Ω load, 30% modulation)
Internal speaker More than 700mW
External speaker More than 500mW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Compare Products
You have no items to compare.
Facebook





























