Emsis slave unit. It requires Nesis or Emsis PFD or Daqu to be present on the bus (depending on the unit purpose.)
A simple to use and affordable engine information system which can be used in conjunction with Nesis or as a standalone instrument. Emsis is available as a standalone or secondary EMS, PFD or Navigation instrument.
We take great care to design our instruments lightweight and slim as possible. Emsis weighs from 235 g to 312 g.
Pressure connection
The instrument must be connected to the total pressure source. Total pressure source is obtained from the total port on the pitot tube.
Static connection
Emsis must be connected to the static pressure source. Either fuselage side surfaces or from the static port on the pitot tube.
CAN bus connection
Used to connect other CAN devices. Connectors are equivalent so either one can be used to connect a CAN device.
OAT connection
Connects to the Kanardia OAT digital probe.
GPS connection
Is used for external GPS antenna needed by the GPS receiver integrated on AHRS unit.
Encoder connection (optional)
Connects with external encoder for regulating QNH.
RS 485 connection
Used to connect with devices via 485 protocol such as indicators or LX Cluster.
Push buttons
Emsis uses six (80 mm version) or five (3.5" screen version) small push buttons to manipulate the user interface.
SD card slot
Emsis has a SD card slot for software, maps and data updates.