Categories
1404.96

Dynon SV-ADAHRS-200/A

€1,700.00 €1,404.96
Primary ADAHRS Module
- +

Backorder:Usually 5-10 days
SKU SVADAHRS200A
Description

SkyView ADAHRS Modules: ADAHRS stands for Air Data/Attitude/Heading Reference System. The SkyView ADAHRS module uses MEMS sensor technology to accurately measure inertial, magnetic, and air data. These provide the data necessary to drive the Artificial Horizon/Synthetic Vision, Airspeed, Altitude, Vertical Speed, Slip, Turn Rate, Angle of Attack, and Gyro-Stabilized Heading. Additionally, Outside Air Temperature is obtained from the SV-OAT-340 Sensor which is connected to the ADHARS Module.

Dynon sells a primary ADAHRS model (SV-ADAHRS-200) and a backup model (SV-ADAHRS-201). The primary and backup models are identical in functionality, however you must have at least one SV-ADAHRS-200 in the system in order for the SV-ADAHRS-201 to function.

OAT Outside Air Temperature: A SV-OAT-340 Outside Air Temperature Sensor is included with each AV-ADAHRS-200/201.

Redundancy: You may have one, two, or more ADAHRS in your SkyView System. If one fails, the backup ADHARS will provide data to the SkyView Display(s). To maintain complete redundancy, a separate SV-OAT-340 Sensor should be connected to each ADAHRS. Note that functionally, the SV-ADAHRS-200 and the SV-ADAHRS-201 are the same. The only difference is that the SV-ADAHRS-201 requires an SV-ADAHRS-200 in the same system in order to be activated.   In the event that the SV-ADAHRS-200 is removed from the system, the SV-ADAHRS-201 will remain activated for an additional 30 flight hours before it becomes deactivated.

Design Considerations: A SkyView Network Cable is used to connect an ADAHRS Module to a Display. One ADAHRS will provide data to as many Displays as are connected in the SkyView System. However, for redundancy, you may want to provide one ADAHRS for each Display.

Outside Reference for Attitude: An ADAHRS requires an outside reference in order to quickly find and maintain its reference horizon. Dynon ADAHRSs use air speed derived from the pitot and static ports as their primary outside reference. Airspeed is the best reference to enable a fast attitude capture; Dynon units can typically find the horizon in under 10 seconds, even in flight. Units that do not use air speed can often take several minutes to find the horizon, and often require straight and level flight or to be stationary on the ground. In order to have a backup in the unlikely event of loss of pitot or static data, all Dynon ADAHRS revert to GPS ground track if a GPS is connected.

Connections: Each ADAHRS contains:
3 - Pneumatic ports for Pitot, Static, and Angle of Attack
1 - 9-Pin DIN Connector for the SkyView Network
2 - 2-Pin Connector for SV-OAT-340 Sensor

Installation Location - Motion Sensors: The ADAHRS internal sensors measure rotational motion and acceleration about the CG of the aircraft. In order to be maintain accuracy, the ADAHRS should be mount.

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

FREE SHIPPING

Free shipping on all orders above 400€

SUPPORT 24/7

Contact us 24 hours a day, 7 days a week

30 DAYS RETURN

Simply return it within 30 days for an exchange.

100% PAYMENT SECURE

We ensure secure payment with PEV